YC系列槽加熱熨平機

YC系列槽加熱熨平機
本公司研制的槽式熨平機采用固定輥筒,升降燙槽、燙輥采用進口無憂簧與進口高級羊毛氈
加壓在燙槽上，*的升降系統，使熨燙壓力均勻，達到理想的熨燙效果。

●選用*的進口變頻器調速系統，熨燙速度可無級調速，運行可靠。
●采用*的線速度設計，熨燙效果好。
●寬燙槽加熱形式，高級拋光處理燙床面，快速加熱。
●封閉式內置抽濕系統，改善工作環境，外形美觀。
●可調熨燙壓力控制，適用于不同布草。
●采用疏水系統，提高熱效率，降低使用成本。
●有多種規格可供選擇，輥筒直徑有1000、800、500mm熨平寬度從2500mm到3200mm，輥筒數目可有1-2個

YC Series Chest Flat Work lroner is another newly developed chest ironer being added into our product line recently.It has fixed roller and elevating chest Rollers are fitted with imported spiral spring cushion support and felt padding is being tightly wrapped round the entire roller surface.Patented elvating mechanism of chest unit allows even ironing pressure being applied through out the whole usable ironing surace and width of the chest,resulting in good flat ironing work.

●Only imported high quality VFD controller is being chosen and incorporated into the contorl system.It allows reliable continuous smooth ironing speed adjustment.
●Utilizes differential front and rear roller speed principle to give a "straightening pull effect" to the fabric during ironing so that good flat work result can be obtained.
●Well polished chest surface finishing with large heating area to allow fast heat-up.
●Fully enclosed humidity control system improves working environment and physical look of the flat work ironer.
●Adjustable ironing pressure to suit different type of flat work items.
●High quality steam trap system which enhances heating efficiency resulting in higher output with lower operating cost.
●Different ironer capacties are available for selection.VIZ;Roller diameter ranging from 1000,800 and 500mm.Ironing width ranging from 2500mm tO 3300mm number of roller range from 1 to2.