ZW016C型松式、緊式絡(luò )筒機 返回列表頁

技術特點tec features

絡(luò )筒機技術參數Technical parameters of winding machine

松式槽筒 loose tube

O/D82mm，節距pitch2.5，對稱型symmetrical type ( 0°)

緊式槽筒 tight tube

O/D82mm，節距pitch2.5，非對稱型asymmetrical type

成型筒子 松式forming bobbin ( loose )

0°圓柱型cylindrical，或圓臺型round table3°30’，4°20’

成型筒子 緊式forming bobbin ( tight )

0°、3°30’、4°20’、5°57’、9°15’（于膨脹錠子only expansion spindle）

自動定長automatic length

根據成品件，電子設定卷繞長度，最長可達999999米 according to the product , it can set the winding yarn length , maximum length 999999 meter.

慢速啟動功能 slow start function

保證平穩啟動，提高卷繞質量ensure a smooth start, improve the quality of winding

配重式紗線制動器weight type yarn brake

可防止紗線在喂入時出現抖動，提供合適卷繞張力prevent yarn jitter in feed, provide appropriate winding tension

電動式上蠟裝置Electric waxing device

可放入方孔蠟塊，并有重力片，每錠一套均勻上蠟 put into square hole wax, and gravity, each spindle uniform waxing

清結調節器 cleaning regulator

可方便調節清結刀門間隙 it can rasy to cleaning and regulate the distance of knife gete.

橫動軟邊 traversing gear

每節獨立電機驅動，橫動量可調each independent motor drive, the transverse momentum can be adjusted

配置 set

每節12錠each section of 12 spindles

驅動方式Drive mode

每錠配一長軸直流無刷電機，可單錠調速，整體調速with a long shaft of the brushless DC motor, can be a single spindle speed, the overall speed.

速度Maximum speed

1100米/分鐘，每面卷繞均可獨立設置1100 M / min, each side can be set up independently.

導紗動程traverse range

松式標配147mm兼有142mm; 緊式標配152mm loose parts 147mm,also have 142mm. tight parts 152mm.

紗架平衡器yarn stａnd balancer

彈簧平衡調節卷繞壓力 spring balance adjustment winding pressure

紗線探測器yarn prober

帶光學傳感器 optical sensors

筒紗直徑 bobbin max diameter

250mm

啟動 / 停止并帶大按鈕開關ON/OFF button switch

單錠薄膜開關控制，LED實時顯示卷繞米數，車頭液晶屏單面總控Single spindle film switch control, LED real-time display of the number of meters, the front side of the liquid crystal screen one side of the total control.

徑向防疊裝置radial preventing stack

電腦控制徑向防疊參數設定 computer control radial preventing stack setting parameters

往復吹吸清潔器 round blowing and suction cleaner

1100W(清潔器功率)power

消耗功率power consumption

40W/錠 (速度)，加清潔器電機功率 40w/spindle(max speed), and cleaner power

電源current source

三相three-phase power 400V+/-10% , 50/60Hz

12錠主機重量/尺寸 the weight /size of 12 spindle

350kg 2108mm(長length)*950mm(寬wide)*1500mm(高high)

吸塵器重量/尺寸 the weight /size of cleaner

125kg 根據錠數確定according to the quantity of spindle

車頭電控箱重量/尺寸the weight/size of electric control box

35kg 700 mm(長length)*300mm(寬wide)*1350mm(高high)