<tt id="i8i4i"><table id="i8i4i"></table></tt>
  • <li id="i8i4i"><table id="i8i4i"></table></li>
    <blockquote id="i8i4i"></blockquote>
  • <tt id="i8i4i"></tt>

    行業產品

    • 行業產品

    天津金鐳科技有限公司


    當前位置:天津金鐳科技有限公司>>>>300系列減壓調節器

    300系列減壓調節器

    返回列表頁
    參  考  價面議
    具體成交價以合同協議為準

    產品型號

    品       牌

    廠商性質其他

    所  在  地天津市

    紡織服裝機械網采購部電話:0571-88918531QQ:2568841715

    聯系方式:查看聯系方式

    更新時間:2022-09-26 10:08:58瀏覽次數:283次

    聯系我時,請告知來自 紡織服裝機械網


      暫無信息


      暫無信息

    經營模式:其他

    商鋪產品:39條

    所在地區:天津天津市

    產品簡介

    APPLICATION:Regulationofinletpressuretogascompressors

    詳細介紹

    APPLICATION:
    Regulation of inlet pressure to gas compressors. Control of
    supply or distribution system pressure
    PRESSURE RANGE:
    Upstream: 10 psig to 300 psig
    Downstream: 3 psig to 280 psig
    OPERATION:
    The Pilot Assembly and Motor Valve Stem Assembly (Crosshatched) are the only moving units in the regulator.
    The PILOT PLUG consists of two stainless balls rigidly connected together. Upstream Pressure (Red) is the supply pressure to the pilot and is also in constant communication with the top side of the MOTOR VALVE DIAPHRAGM. The area of the MOTOR VALVE DIAPHRAGM is twice the area of the motor valve seat, assuring a positive shut-off.
    The lower seat for the PILOT PLUG is the Motor Valve Diaphragm Pressure inlet (Red to Yellow). The upper seat for the PILOT PLUG is the pressure vent (Yellow to Atmosphere). The PILOT SPRING loads the upper side of the Pilot Assembly and is opposed on the underneath side by the controlled Downstream Pressure (Blue).
    Assume the PILOT SPRING is compressed with the ADJUSTING SCREW for a desired Downstream Pressure setting. With Downstream Pressure (Blue) too low, the PILOT SPRING forces the Pilot Assembly downward to close the upper seat (Yellow to Atmosphere) and open the lower seat (Red to Yellow).
    This lets full Upstream Pressure (Red) load the underneath side of the MOTOR VALVE DIAPHRAGM to balance the pressure on the top side. Upstream Pressure (Red) acting under the motor valve seat, opens the valve. As Downstream Pressure(Blue) increases to the set pressure Pilot Assembly assumes a position in which both seats of the PILOT PLUG are closed.
    Should Downstream Pressure (Blue) rise above the set pressure, the Pilot Assembly moves upward against the PILOT SPRING to open the pressure vent (Yellow to Atmosphere). Motor Valve Diaphragm Pressure (Yellow) decreases to reposition the Motor Valve Stem Assembly.
    The intermittent bleed pilot, three-way valve action of the PILOT PLUG against its seat adjusts the Motor Valve Diaphragm
    Pressure (Yellow), repositioning the Motor Valve stem Assembly to accommodate any rate of flow. The rapid but stable repositioning
    produces a true throttling action.

    鑄鐵材質產品表
    貨號 連接尺寸 連接方式 描述 操作壓力 工作壓力 維修包
    A1105 1" SCRD 112 SGT PR 125 175 R1820
    A0211 2" SCRD 212 SGT PR 125 175 R0101
    A0212 2" FLGD 212 FGT PR 125 175 R0101
    A0213 2" GRVD 212 GGT PR 125 175 R0101
    A0214 3" SCRD 312 SGT PR 125 175 R0102
    A0216 3" FLGD 312 FGT PR 125 175 R0102
    A0218 4" SCRD 412 SGT PR 125 175 R0103
    A0219 4" FLGD 412 FGT PR 125 175 R0103
    A0220 6" FLGD 612 FGT PR 125 175 R0104
    球墨鑄鐵材質產品表
    A1106 1" SCRD 130 SGT PR-D 300 300 R1821
    A0221
    2" SCRD 230 SGT PR-D 300 300 R0407
    A0223 2" FLGD 218 FGT PR-D 250 250 R0407
    A0224
    3" SCRD 330 SGT PR-D 300 300 R0408
    A0225 3" FLGD 318 FGT PR-D 250 250 R0408
    A0301
    4" SCRD 430 SGT PR-D 300 300 R0409
    A0302 4" FLGD 418 FGT PR-D 250 250 R0409
    A0303 6" FLGD 618 FGT PR-D 250 250 R0410
    鑄鋼材質產品表
    A0707 2" FLGD 227 FGT PR-S 285 285 R0105
    A0708 3" FLGD 327 FGT PR-S 285 285 R0106
    A0709 4" FLGD 427 FGT PR-S 285 285 R0107
    A0710 6" FLGD 627 FGT PR-S 285 285 R0108


    其他推薦產品更多>>

    感興趣的產品PRODUCTS YOU ARE INTERESTED IN

    紡織服裝機械網 設計制作,未經允許翻錄必究 .? ? ? Copyright(C)?2021 http://www.lcservicesllc.com,All rights reserved.

    以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,紡織服裝機械網對此不承擔任何保證責任。 溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。

    會(huì )員登錄

    ×

    請輸入賬號

    請輸入密碼

    =

    請輸驗證碼

    收藏該商鋪

    登錄 后再收藏

    提示

    您的留言已提交成功!我們將在第一時間回復您~
    色欲综合久久躁天天躁_亚洲欧美另类激情综合区蜜芽_久久99国产综合精品女同_最近最好的2019中文日本字幕