上海信聯創(chuàng )作電子有限公司
員1.png)
上海信聯創(chuàng )作電子有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質其他
所 在 地上海
紡織服裝機械網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2025-01-02 23:30:34瀏覽次數：44次
聯系我時，請告知來自 紡織服裝機械網SP-BS-1908 型雜質黑點檢測儀
SP-BS-1908 型雜質黑點檢測儀
SUNPLUS 黑點檢測儀的用途Application
按相關國家標準分析樹脂片或顆粒的雜質黑點的大小、數量，以及黑點顆粒占比數。
This equipment evaluates the number and size of blackspot,as well as the ratio of blackspot in beads,for resin sheet or pellet
in accordance with relevant industry standard or code.
適用于透明、半透明、不透明的膜片、顆粒，如PP、PE、PVC、PPS 等等。
Applicable for inspection and analysis for transparent or semitransparent or even opaque materials,such as PP,PE,PVC,PPS，etc.
也適用薄膜等透明體的黑點和內在疵點的檢測和分析。
Also can be used to detect and analyze black spots or defects of inner quality in transparent film.
SUNPLUS 黑點檢測儀的技術指標Specifications
1. 測量規格：0.1mm,0.2mm,0.3,0.4mm,0.8mm,1.0mm,1.2mm，…,等等,按選用的標準，可在軟件界面選定。
Measurement Range: 0.1mm,0.2mm,0.3mm,0.4mm,0.8mm,1.0mm,1.2mm,…,etc.,up to relevant code being applied， ａnd is selectable
via software.
2. 最小檢測目標： 0.1mm
Min target radius：0.1mm
3. 檢測精度： 小于0.035mm
Resolution: less than 0.035mm
4. 檢測面積：不小于200×200mm
Detection Area: Not less than 200×200mm
5. 器皿大?。?00mm×200mm 凈面積，用于顆粒黑點檢測。
Tray size: 200mm×200mm，net area for bead blackspot inspection.
6. 放大倍數：>20 倍
Amplification: more than 20times.
7. 光密度:不小于6000 流明
Light-intensity index : Not less than 6000 Lumens
8. 光源要求: 24V/60W
Illuminator bulb assembly: 24V/60W
9. 供電電源：220V,50HZ
Power Supply: 220V,50HZ
10.外形尺寸：約459mmⅹ426mmⅹ(276mm+380mm)
Dimension: around 459mmⅹ426mmⅹ(276mm+380mm)
儀器功能特點
1. 測量黑點的大小和數量,以及黑點顆粒占比數。 SP-BS-1908 型 黑點檢測儀
Detects the size and quantity of blackspot,as well as the ratio of BS in beads.
2. 可提供黑點、損壞顆粒，以及膜片質地紋路的分布圖譜。
Provides mapping of blackspots or inner quality,as well as the defected bead.
3. 黑點或膜片質地分布可放大和縮小。
Ability to zoom in and out to view blackspot or striation in sample. Showing in detail the texture shape of it.
4. 被測目標可分類計數和統計。
Counting and classification of the targets being measured.
5. 按適用的標準自動生成檢測報告。
Automatically generates Inspection Report based on different standard or code.
6. 報告和圖譜可打印可儲存。
Report and Mapping is printable or can be saved.
7. 進樣方向與屏幕顯示的走向一致，友好的界面視覺感。
Sample feeding direction is same as the moving direction of display on the computer screen with friendly interface design.
8. 顆粒以透明器皿為載體，批次檢測。
Bead is inspected by using transparent tray in batch.
9. 透明薄膜直接平鋪在檢測平臺上進行檢測，無需對薄膜作黑化或貼紙處理。
Transparent film is directly spread on the inspection platform for detecting,without any pretreatment by blackening or paper
back stick process.
儀器的配置
☆ SP-BS-1908M 雜質黑點檢測儀Type of SP-BS-1908 Blackspot Detector.
☆ 標準板Standard Plate for Calibration.
☆ 透明器皿 (測顆粒用) Transparent tray （ be used for bead inspection）
☆電腦工作站W(wǎng)orking Station of Computer.
☆ 應用軟件 Application Software.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
紡織服裝機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
