石膏壓力試驗機是石膏檢測儀器，用于測定建筑石膏抗壓強度試驗的專用設備，產品符合GB9776標準要求。使用前務必仔細閱讀說明書。并由**實驗人員操作，以避免操作不當引起的傷害。如需了解更多資料請與我公司客服人員聯系。石膏壓力試驗機由上海榮計達儀器科技有限公司提供，設備質保期一年，一年內產品如有質量問題，供方負責免費維修。如果因操作不當或者人為損壞，我公司亦應提供維修、更換服務，由此產生的費用我公司會(huì )酌情收取。
The gypsum pressure tester is a special gypsum testing instrument. It is a special equipment for determining the compressive strength of building gypsum. The product meets the requirements of the GB9776 standard. Be sure to read the instructions carefully before use. It is operated by ** experimental personnel to avoid injury caused by improper operation. For more information, please contact our customer service staff. The gypsum pressure testing machine is provided by Shanghai Rongjida Instrument Technology Co., Ltd. The equipment warranty period is one year. If the product has quality problems within one year, the supplier is responsible for free maintenance. If due to improper operation or man-made damage, our company should also provide repair and replacement services, and the costs incurred by our company will be charged at our discretion.
石膏壓力試驗機由機架、測力、示值、油泵、送油及回油閥等部件組成，各部件均安裝于一個座箱上構成一個整體。
石膏抗壓強度試驗機使用操作方法：
試驗人員在作試驗前應對試件A大載荷有所估計，以便選用相應的測量范圍，才能得到準確的數據。例如：某試件估計A大載荷不超過50kN的就應選用60kN的量程，而不用150kN用300kN的量程，如估計試件A大載荷不超120kN的就應選用150kN的量程而不選取用300kN的量程，這樣是為了保證試驗結果數據更能準確。
The gypsum pressure tester consists of a frame, force measurement, indication, oil pump, oil delivery and oil return valve, etc., each component is installed on a seat box to form a whole.
Operation method of gypsum compressive strength testing machine:
The tester should estimate the large load of specimen A before conducting the test, so that the corresponding measurement range can be used to obtain accurate data. For example, if a test specimen is estimated to have a large load not exceeding 50 kN, a range of 60 kN should be used instead of 150 kN and a range of 300 kN should be used. This is to ensure that the test result data is more accurate.
石膏壓力試驗機的安裝、試車及保養：
①試驗機應安裝在清潔、干燥、溫度均勻，周?chē)鸁o(wú)震動，無腐蝕性氣體影響的房子里。
②安裝地點應位置適當，便于操作和維護保養。安裝地基應牢固可靠，地腳螺釘應對準底座。
③機體的水平調試方法：
用0.10/1000方水平儀測量工作缸臺面，找縱橫水平至±1格，若超出±1格，可在底座下面加墊鐵校正，擰緊地腳螺母。
Installation, commissioning and maintenance of plaster pressure testing machine:
① The testing machine should be installed in a clean, dry, uniform temperature house without vibration and corrosive gas.
② The installation site should be properly located to facilitate operation and maintenance. The installation foundation should be firm and reliable, and the anchor screws should be aligned with the base.
③ The horizontal debugging method of the body:
Use a 0.10 / 1000 square spirit level to measure the table surface of the working cylinder, find the horizontal and vertical level to ± 1 grid, if it exceeds ± 1 grid, you can add horn correction under the base, and tighten the ground nut
石膏壓力試驗機技術參數：
★大試驗力 300kN
★試驗力示值相對誤差 ≤±1%
★液壓泵額定壓力 25MPa
★抗折輥直徑 φ30mm
★上下抗折輥間A大間距 165mm
★兩上抗折輥間中間距 150mm
★兩下抗折輥間中間距 450mm
★承壓板尺寸 φ155mm
★上下壓板間A大間距 230mm
★活塞直徑和A大行程 φ125mm×80mm
★電動機功率 三相0.75 kW
★外型尺寸（長×寬×高） 850×620×1340mm
★凈重 約400Kg
Technical parameters of gypsum pressure tester:
★ High test force 300kN
Relative error of test force indication value ≤ ± 1%
★ Hydraulic pump rated pressure 25MPa
★ Diameter of anti-bending roller φ30mm
★ A large distance between the upper and lower anti-folding rollers 165mm
The middle distance between the two upper anti-folding rollers is 150mm
The middle distance between the two anti-folding rollers is 450mm
★ Pressure plate size φ155mm
★ A large distance between upper and lower platen 230mm
★ Piston diameter and A large stroke φ125mm × 80mm
★ Motor power three-phase 0.75 kW
★ External dimensions (length × width × height) 850 × 620 × 1340mm
★ Net weight: about 400Kg
員1.png)
QQ:2568841715
