<tt id="i8i4i"><table id="i8i4i"></table></tt>
  • <li id="i8i4i"><table id="i8i4i"></table></li>
    <blockquote id="i8i4i"></blockquote>
    • <tt id="i8i4i"></tt>

    行業產品

    • 行業產品

    北京三尼陽光科技發展有限公司


    光學斬波器

    返回列表頁
    參  考  價面議
    具體成交價以合同協議為準

    產品型號

    品       牌

    廠商性質其他

    所  在  地北京市

    紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

    聯系方式：查看聯系方式

    更新時間：2024-09-30 11:01:09瀏覽次數：76次

    聯系我時，請告知來自 紡織服裝機械網

    經營模式：其他

    商鋪產品：74條

    所在地區：北京北京市

    產品簡介

    652系列光斬波器已停產，請您選購其他型號

    詳細介紹

    Model 651-1
    Dual Aperture Light Chopper
    The model 651-1 uses the standard head. This is a dual port design allowing two optical beams to be modulated simultaneously at different frequencies, f1 and f2. Two reference (sync) outputs are made available at the control unit, corresponding to f1 and f2, for use with signal recovery processing electronics, such as a lock-in amplifier.

    Two small blanking plates are provided with the standard head and one of these allows either the top port or the bottom port to be blanked off to reduce the effect of any stray light passing through an unused path. The second plate provides some measure of beam restriction when using large diameter beams on the higher frequency (ａnd therefore smaller aperture) port. The standard head is supplied complete with a flat base plate to allow the unit to be used in a free standing mode on a bench type surface. A special feature of this support allows the head to be used in the horizontal plane for modulating vertical beams. The base plate can be removed and standard optical mounting supports employed instead if preferred.

    Model 651-1 Mechanical Dimensions


    Model 651-1 Blade Dimensions


    Model 651-1 Specifications
    Operation
    Frequency 10 Hz to 3200 Hz
    outer sector 100 Hz to 3200 Hz
    inner sector 10 Hz to 320 Hz
    Control
    manual Digital push-button
    external Application of 0.5 V to 10 V sine or squarewave, 50 Hz to 3200 Hz to EXT SYNC BNC connector
    Internal Frequency
    accuracy ±30 ppm at 25 °C
    stability ±50 ppm/ °C (range 10 °C to 30 °C)
    Jitter (measured pk-pk and presented as a % of a full cycle)
    outer sector
    100 to 200 Hz blade only: 0.2%; blade + electronics: < 7%
    200 to 400 Hz blade only: 0.2%; blade + electronics: < 4%
    400 to 2500 Hz blade only: 0.2%; blade + electronics: < 1.5%
    2500 to 3200 Hz blade only: 0.2%; blade + electronics: < 2%
    inner sector
    10 to 20 Hz blade only: 0.2%; blade + electronics: < 0.7%
    20 to 40 Hz blade only: 0.2%; blade + electronics: < 0.4%
    40 to 250 Hz blade only: 0.2%; blade + electronics: < 0.2%
    250 to 320 Hz blade only: 0.2%; blade + electronics: < 0.3%
    Lock indication green LED when locked - can be extinguished
    Settling Time <40 s nominal
    Outputs
    Sync Out 1 10 V pk-pk squarewave at outer sector chopping frequency, 50 - 3200 Hz
    Sync Out 2 10 V pk-pk squarewave at inner sector chopping frequency, 10 - 320 Hz
    Connectors BNC
    Impedance 10 kΩ. Note that although the output voltage is 10 V pk-pk, the high output impedance means that the outputs can be directly connected to the Reference Frequency input of any SIGNAL RECOVERY lock-in amplifier without causing problems.
    Power Requirements 110 V AC, 50/60 Hz or 220/240 V AC, 50/60 Hz supply. State which voltage is required when ordering
    Dimensions
    Controller 6.6" wide x 3.1" high x 9.3" deep
    (168 mm wide x 79 mm high x 236 mm deep)
    Chopper head, overall, inc. base and feet 4.8" wide x 5.9" high x 2.8" deep
    (122 mm wide x 150 mm high x 72 mm deep)
    Options Model 653A 2 m (6'6") extension cable


    您感興趣的產品PRODUCTS YOU ARE INTERESTED IN

    紡織服裝機械網 設計制作，未經允許翻錄必究 .? ? ? Copyright(C)?2021 http://www.lcservicesllc.com,All rights reserved.

    以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，紡織服裝機械網對此不承擔任何保證責任。 溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。

    會(huì )員登錄

    ×

    請輸入賬號

    請輸入密碼

    =

    請輸驗證碼

    收藏該商鋪

    請 登錄 后再收藏

    提示

    您的留言已提交成功！我們將在第一時間回復您~
    色欲综合久久躁天天躁_亚洲欧美另类激情综合区蜜芽_久久99国产综合精品女同_最近最好的2019中文日本字幕