★主要技術參數（Technical parameters）：
1、車頭主軸徑向跳動:0.01mm
Vertical vibration of machine head main axle: 0.01 mm
2、砂輪主軸徑向跳動:0.008mm
Vertical vibration of grinding wheel main axle: 0.008 mm
3、加工后膠輥的徑向跳動:0.015mm(排除膠輥本身間隙條件下)
Vertical vibration of rubber roller after processing:0.015mm
(excluding clearance of rubber roller itself)
4、加工后膠輥的兩端直徑差:0.015mm(排除膠輥本身間隙條件下)
Diameter difference between of two ends of rubber roller after
processing:0.015 mm(excluding clearance of rubber roller itself)
5、加工后膠輥的表面粗糙度:Ra0.2～0.8mm(精磨)
Surface roughness of rubber roller after processing: Ra 0.2~0.8um ( fine grinding )
6、產量(Output):800～1000只/班(pcs/shift)
7、電源及功率(power supply & motor power)：380V 50Hz 4.21KW
8、外形尺寸(package)：長(L)×寬(W)×高(H)=（175×104×160）cm3
9、機器毛/凈重(G/N weight)：980/1060kg（含集塵箱）
★性能特征（Characteristics）：
1、磨頭、車頭和臺面變頻無級調速
Speed control by three transducers for grinder, headstock and worktable .
2、“V”型交叉導軌：確保拖板往復直線度。
“V” type cross liners are adopted for insuring the board moving in straight.
3、永磁電機：扭矩大，確保運轉平穩。
Magnetic motor is adopted for insuring stabilization in running.
4、無中心夾具：確保羅拉軸承與膠輥的同心度。
Clamp without center is adopted for insuring concentricity between bearing and rubber.
5、斷電保護：瞬間斷電保證工件的夾持力，確保人身安全。
Electrical protection system is adopted for insuring operator in safety.
粗細紗膠輥夾具
臺面橫動永磁電機
磨頭、臺面
車頭變頻調速
