采用5.7英寸（320×240）PLC多彩液晶觸摸顯示屏，中文菜單顯示。并由鍵盤進行選擇注射器的公稱容量，并在測試過程中顯示裝配施加的軸向力、扭矩，保持時間、內部水壓、分離力、泄漏率值，可由機載打印機打印出測試結果。
注射器注射針圓錐接頭性能綜合測試儀符合GB/T1962及ISO80369標準中相關條款設計制造。
也可測試注射器、注射針、及、、、導管、麻醉過濾器等科研（魯爾）圓錐接頭(鎖定和非鎖定)的漏液、漏氣、分離力、旋開扭矩、易裝配性、抗滑絲性、應力開裂等多項性能指標。
軸 向 力： 20N~40N，誤差不大于±2%；
內部水壓： 200kPa~400kPa，誤差不大于±5kPa；
分 離 力： 20N~40N，誤差不大于±2%；
保持時間： 1~60s，誤差不大于±1s任意設定；
扭 矩： 0.1N?m
公稱容量： 1mL~60mL任意選擇。
凈重：20Kg 外形尺寸：440×350×384 (mm)
部分清單：
1.主機一臺 2.打印紙1卷 3.夾具一套 4.砝碼一套 5.質保一年
6.操作說明 7.儀器依國家標準規定升級服務
It adopts 5.7 inch（320×240）PLC multi-color LCD touch screen and Chinese menu display. The nominal capacity of the syringe is selected by the keyboard, and the axial force and torque applied by the assembly are displayed during the test. The retention time, internal water pressure, separation force and leakage rate can be printed out by the airborne printer.
The syringe needle conical joint performance comprehensive tester fully conforms to the relevant provisions of GB/T1962 and ISO80369 standards.
It can also test the leakage, air leakage, separation force, unscrewing torque, easy assembly, anti-slip wire, stress cracking and other performance indicators of the conical joint (locking and non-locking) of medical devices (Ruhr) such as syringes, injection needles, infusion devices, blood transfusion devices, infusion needles, catheters, anesthesia filters, etc.
Axial force: 20N ~ 40N, error is not more than (+2%);
Internal water pressure: 200 kPa to 400 kPa, the error is not more than +5 kPa;
Separation force: 20N ~ 40N, error is not more than (+2%);
Holding time: 1 ~ 60 seconds, error is not more than (+1 s) arbitrarily set;
Torque: 0.1N * m
Nominal capacity: 1 mL ~ 60 mL arbitrary choice.
Net weight: 20kg shape size: 440 *350 *384 (mm)
Part of the list:
1. A mainframe 2. Printing paper 1 roll 3. Fixture set 4. Weight set 5. Quality guarantee for one year
6. Operational instructions 7. Free upgrade service of instrument in accordance with national standards for life
