一、產品簡介：
YJW-10000型微機控制電液伺服壓剪試驗機是采用了液壓動力源驅動，電液伺服控制技術，計算機數據采集處理，可實現閉環控制及自動檢測的高精度材料試驗設備，其主要結構由試驗主機框架、剪切機架、轉角測量機架、主油源（液壓動力源）、電氣控制系統等組成，試驗力10000kN，試驗機準確度等級0.5級。主要用于各種橋梁板式、盆式橡膠支座在抗壓、抗剪切力的復雜條件下，檢測支座的軸向徑向抗壓、抗剪、轉角力學試驗；可進行橡膠支座的抗壓強度、抗壓彈性模量、抗剪粘結性能、抗剪老化、摩擦系數、轉角等試驗，也可以進行混凝土等其他材料試樣的彈性模量及壓縮性能檢測。
1. Product introduction
The YJW-10000 computer-controlled electro-hydraulic servo compression shear testing machine is a high-precision material testing equipment that adopts hydraulic power source drive, electro-hydraulic servo control technology, computer data acquisition and processing, and can realize closed-loop control and automatic detection. Its main structure is The test host frame, shearing frame, corner measuring frame, main oil source (hydraulic power source), electrical control system, etc., have a maximum test force of 10000kN, and the accuracy of the test machine is 0.5. It is mainly used to test the axial and radial compression, shear and corner mechanics tests of various bridge slab and basin rubber bearings under the complex conditions of compression and shear resistance; it can be used for rubber bearings. Compressive strength, compressive elastic modulus, shear bonding performance, shear aging resistance, coefficient of friction, corners and other tests, and can also be used to test the elastic modulus and compression performance of concrete and other material samples.
二、該試驗機及配件符合以下標準要求：
GB/T2611《試驗機通用技術要求》
GB/T3159《液壓式試驗機》
JB/T11582《壓剪試驗機》
GB20688.4《橡膠支座 第四部分：普通橡膠支座》
GB/T17955《球型支座技術條件》
JT/T4公路橋梁板式橡膠支座》
JT/T391《公路橋梁盆式橡膠支座》
TB/T1893《鐵路橋梁板式橡膠支座》
TB/T2331《鐵路橋梁盆式支座》
TB/T3320《鐵路橋梁球式支座》
2. The testing machine and its accessories meet the requirements of the following standards:
GB/T2611 "General Technical Requirements for Testing Machines"
GB/T3159 "Hydraulic Universal Testing Machine"
JB/T11582 "Compression and Shear Testing Machine"
GB20688.4 "Rubber Bearing Part 4: Ordinary Rubber Bearing"
GB/T17955 "Technical Conditions for Spherical Bearings"
JT/T4 Highway Bridge Plate Rubber Bearing》
JT/T391 "Highway Bridge Basin Rubber Bearing"
TB/T1893 "Railway Bridge Plate Rubber Bearing"
TB/T2331 "Railway Bridge Basin Bearing"
TB/T3320 "Railway Bridge Ball Bearing"
三、產品參數：
■大試驗力：10000KN；
■準確度等級：0.5級；
■示值相對誤差：±0.5%；
■有效測量范圍：1%-99%F·S（全量程不分檔）；
■結構：四柱框架；
■上下壓板距離調節方式：油缸調節；
■立柱間距離：1090mm；
■上下壓板間距離：800mm；
■壓板尺寸：1050mm×1050mm；
■主油缸活塞行程：800mm；
■主油缸活塞位移速度：0-100mm/min；
■位移測量范圍：0-1000mm；
■軸向變形測量范圍： 0-20mm；
■徑向變形測量范圍： 0-10mm；
■變形測量分辨力：0.001mm；
■主機外形尺寸：6000mm×1650mm×4150mm；
■控制柜尺寸：2240 mm×1310 mm×1000 mm；
■整機功率：20kW；
■輸入電壓：380V（三火一零）
■控制柜重量：1000 kg；
■主機重量： 38000kg；
剪切試驗部分
■水平剪切力：2000 KN；
■示值相對誤差：±0.5%；
■水平活塞行程： 250mm；
■剪切板尺寸：1050mm×1050mm；
■拉伸速度：0-100mm/min；
■位移測量范圍：0-250mm；
■位移測量分辨力：0.01mm；
轉角試驗部分
■轉角頂出力：600KN；
■示值相對誤差：±0.5%；
Three, product parameters
■Large test force: 10000KN;
■Accuracy level: 0.5 level;
■Relative error of indication: ±0.5%;
■Effective measuring range: 1%-99%F·S (full range without bins);
■Structure: four-pillar frame;
■Adjustment method of distance between upper and lower pressing plates: oil cylinder adjustment;
■The distance between the columns: 1090mm;
■The distance between the upper and lower pressing plates: 800mm;
■Press plate size: 1050mm×1050mm;
■The piston stroke of the main oil cylinder: 800mm;
■The displacement speed of the piston of the main oil cylinder: 0-100mm/min;
■Displacement measurement range: 0-1000mm;
■Axial deformation measurement range: 0-20mm;
■Measurement range of radial deformation: 0-10mm;
■Resolution of deformation measurement: 0.001mm;
■ External dimensions of the host: 6000mm×1650mm×4150mm;
■Control cabinet size: 2240 mm×1310 mm×1000 mm;
■The power of the whole machine: 20kW;
■Input voltage: 380V (three fires and one zero)
■Control cabinet weight: 1000 kg;
■The weight of the host: 38000kg;
Shear test part
■Horizontal shear force: 2000 KN;
■Relative error of indication: ±0.5%;
■Horizontal piston stroke: 250mm;
■Shear size: 1050mm×1050mm;
■Stretching speed: 0-100mm/min;
■Displacement measurement range: 0-250mm;
■Displacement measurement resolution: 0.01mm;
Corner test part
■ Corner ejection force: 600KN;
■Relative error of indication: ±0.5%;
