功能說明及注意事項 Function description and precautions
1、根據不同材料,上下壓輪不同壓力調節。
According to different materials, the pressure of the upper and lower rollers is adjusted differently.
2、PLC控制觸摸數字調節參數,方便簡捷。
PLC control touch digital adjustment parameters, convenient and simple.
3、多種布條長度選擇,自動計算長度,自動切剪布條,亦可腳觸切剪。
A variety of cloth strip length options, automatic length calculation, automatic cutting and cutting of cloth strips, and foot touch cutting.
4、兩段溫度設定,使溫度恒定,可調低風高溫,不易破壞布料表面。
The two-stage temperature setting makes the temperature constant, and the high temperature of the wind can be adjusted to reduce the surface of the cloth.
一般風爐溫度設定350℃-400℃,風口溫度300℃-320℃。
Generally, the temperature of the furnace is set to 350℃-400℃, and the temperature of the tuyere is 300℃-320℃.
5、熱風壓表調節時注意:低速低溫,高速高溫,0.1-0.3范圍。
Note when adjusting the hot air pressure gauge: low speed and low temperature, high speed and high temperature, 0.1-0.3 range.
產品參數 Product Parameters
項目 Project | 基本能效 Basic Energy |
電壓 Voltage | 220V |
滾 輪 速 度 Wheel Speed | 21M/min |
滾 輪 壓 緊 力 Rollerpressing Force | 0-800N |
熱 風 溫 度 范 圍 Hot Air Temperature Range | 0-700°C |
功 率 Power | 2.85KW |
工作氣壓 Working Pressure | 40kg/cm2 |
風嘴寬度 Air Nozzie Width | 20mm |
熱風氣壓 Air Pressure | 0.1-0.2kg/cm2 |
上輪寬度 Upper Wheel Width | 24.5mm |
下輪寬度 Lower Wheel Width | 24mm |
備注 Note:
爐內溫度 Furnace Temperature:350-400℃
空氣出口溫度 Air Outlet Temperature:300-320℃