一、產品概述：
智能型墻體穩定態熱傳遞試驗機采用標定熱箱和防護熱箱法兼容原理，用于建筑墻體及板狀保溫材料的傳熱系數檢測。設備利用計算機自動控制，數據采集、溫度控制、曲線顯示和結果打印等全部測試過程均自動完成，測量時間短、速度快、數據準確、自動化程度高、噪音低。
1. Product overview:
The intelligent wall steady-state heat transfer testing machine adopts the compatible principle of the calibration hot box and the protective hot box method, and is used for the detection of the heat transfer coefficient of the building wall and the plate-shaped insulation material. The equipment is automatically controlled by a computer, and all test processes such as data acquisition, temperature control, curve display and result printing are completed automatically. The measurement time is short, the speed is fast, the data is accurate, the degree of automation is high, and the noise is low.
二、適用標準：
GB/T13475-2008《絕熱穩態傳熱性質的測定標定和防護熱箱法》
JG/T 10294-2008 《絕熱材料穩態熱阻及有關特性的測定防護熱板法》
2. Applicable standards:
GB/T13475-2008 "Determination of adiabatic steady-state heat transfer properties, calibration and protective hot box method"
JG/T 10294-2008 "Determination of Steady State Thermal Resistance and Related Characteristics of Thermal Insulation Material Protective Hot Plate Method"
三、技術參數：
1、熱室溫度：60℃；
2、熱室溫度控制精度：±0.2℃；
3、冷室溫度：-20℃；
4、冷室溫度控制精度：±0.2℃；
5、試件計量尺寸：1000mm×1000mm；1200mm×1200mm；1500mm×1500mm（可選擇）；
6、加熱功率：500W；
7、供電電源：AC380V 三相五線制。
3. Technical parameters:
1. Hot chamber temperature: 60℃;
2. The temperature control accuracy of the hot chamber: ±0.2℃;
3. Cold room temperature: -20℃;
4. Temperature control accuracy of cold room: ±0.2℃;
5. Measurement size of test piece: 1000mm×1000mm; 1200mm×1200mm; 1500mm×1500mm (optional);
6. Heating power: 500W;
7. Power supply: AC380V three-phase five-wire system.
