一、概述：
NDJ-5T觸摸屏數字旋轉粘度計融入觸屏科技，用一種時尚現代的高技術來快速、準確、方便地測量粘度。功能強大，遠非之前的液晶顯示粘度計可比。
自建30組測試程序幫助用戶快速準確地獲得樣品的粘度和相關數據。5英寸彩色觸摸屏可全面、形象地顯示各種參數和工作狀況。具有測量參數多、顯示內容豐富，操作便捷、讀數直觀、測量精度高、轉速穩定、抗干擾性能強、工作電壓寬等明顯優點?？商娲?lèi)型進口儀器。
廣泛應用于需要測量粘度的各種流體和高溫熔融下的流體。包括油漆、涂料、化妝品、油墨、紙漿、食品、油品、淀粉、溶劑型膠黏劑、乳膠、生化制品等以及需要高溫熔融的、如瀝青、石蠟、熱熔膠等行業。
I. Overview:
NDJ-5T touch screen digital rotary viscometer integrates touch screen technology, using a stylish modern high technology to quickly, accurately and conveniently measure viscosity. Powerful, far from comparable to the previous liquid crystal display viscometer.
30 sets of self-built test programs help users quickly and accurately obtain sample viscosity and related data. The 5-inch color touch screen can display various parameters and working conditions comprehensively and vividly. It has the obvious advantages of multiple measurement parameters, rich display content, convenient operation, intuitive reading, high measurement accuracy, stable speed, strong anti-interference performance, and wide working voltage. It can replace imported instruments of the same type.
It is widely used in various fluids that need to measure viscosity and fluids that are melted at high temperatures. Including paints, coatings, cosmetics, inks, pulp, food, oil, starch, solvent-based adhesives, latex, biochemical products, etc., as well as industries that require high-temperature melting, such as asphalt, paraffin wax, and hot melt adhesives.
二、主要特點：
① 采用ARM技術，內置Linux系統。操作介面簡潔明了，通過測試程序的創(chuàng )建和數據分析，快速而方便地進行粘度測試；
② 粘度測值準確，每個量程都用計算機自動校準，精度高，誤差??；
③ 顯示內容豐富：除了粘度外，還有溫度、剪切速率、剪切應力，測量值占滿量程值百分比（圖形顯示）、量程溢出報警、自動掃描、當前轉子轉速組合下的測量范圍、日期、時間等。并可在已知密度的情況下顯示運動粘度，可滿足用戶的不同測量要求；
④ 功能齊全，可定時測量、自建30組測試程序、存取30組測量數據、實時顯示粘度曲線、打印數據和曲線等；
⑤ 前置水平儀，水平調節直觀方便；
⑥ 可選配溫度探頭、粘度計專用恒溫浴槽、恒溫杯、打印機、標準粘度樣品（標準硅油）等；
⑦ 中英文操作系統。
2. Main features:
① Using ARM technology, built-in Linux system. The operation interface is simple and clear. Through the creation of the test program and data analysis, the viscosity test can be carried out quickly and conveniently;
② The viscosity measurement value is accurate, and each range is automatically calibrated by computer, with high accuracy and small error;
③ Rich display content: In addition to viscosity, there are also temperature, shear rate, shear stress, measured value as a percentage of full scale value (graphic display), range overflow alarm, automatic scan, measurement range and date under the current rotor speed combination , Time, etc. It can also display the kinematic viscosity when the density is known, which can meet the different measurement requirements of users;
④ Complete functions, can measure regularly, build 30 sets of test programs, access 30 sets of measurement data, display viscosity curves in real time, print data and curves, etc.;
⑤ Front level meter, level adjustment is intuitive and convenient;
⑥ Optional temperature probe, special constant temperature bath for viscometer, constant temperature cup, printer, standard viscosity sample (standard silicone oil), etc.;
⑦ Chinese and English operating system.
三、 主要技術參數：
■控制/顯示方式：5 英寸彩色觸摸屏
■轉速（r/min）：3/6/12/30/60
■測量范圍mPa.s：1～100000 (10萬）
■測量10以下的超低粘度，需選配0#轉子
■轉子：1 - 4#（標配）0#轉子（選配）
■測量誤差（牛頓液體）：±1%
■重復誤差（牛頓液體）：±0.5%
■定時功能：標配
■溫度測量功能：標配溫度探頭接口（需要選配溫度探頭）
■自動掃描功能：自動掃描并推薦轉子與轉速的優先組合
■顯示測量范圍：自動顯示所選擇的轉子與轉速的組合可測量的粘度范圍
■顯示剪切應/剪切速率：標配
■自動顯示運動粘度：需輸入樣品的密度
■自建測量程序：30組（包括轉子、轉速、溫度、時間等）
■保存測量結果：30組數據（含粘度、溫度、轉子、轉速、剪
■切速率、剪切應力、時間、密度、運動粘度等）
■粘度曲線：實時顯示粘度曲線
■打?。簲祿?、曲線可打?。伺溆写蛴〗涌?，需選購打印機）
■工作電源：寬電壓工作（110V / 60Hz 或 220V / 50Hz）
■外形尺寸：300 × 300 × 450（mm）
3. Main technical parameters:
■Control/display mode: 5-inch color touch screen
■Speed (r/min): 3/6/12/30/60
■Measuring range mPa.s: 1～100,000 (100,000)
■Measuring ultra-low viscosity below 10, 0# rotor is required
■ Rotor: 1-4# (standard) 0# rotor (optional)
■Measurement error (Newtonian liquid): ±1%
■Repeat error (Newtonian liquid): ±0.5%
■Timing function: standard configuration
■Temperature measurement function: standard temperature probe interface (optional temperature probe required)
■Auto scan function: Automatic scan and recommend the priority combination of rotor and speed
■Display measuring range: automatically display the measurable viscosity range of the selected rotor and speed combination
■Display shear response/shear rate: standard
■Automatically display kinematic viscosity: the density of the sample needs to be input
■Self-built measurement program: 30 groups (including rotor, speed, temperature, time, etc.)
■Save measurement results: 30 sets of data (including viscosity, temperature, rotor, speed, shear
■Shear rate, shear stress, time, density, kinematic viscosity, etc.)
■Viscosity curve: display the viscosity curve in real time
■Printing: data and curves can be printed (printing interface is standard, printer is required)
■Working power supply: wide voltage operation (110V / 60Hz or 220V / 50Hz)
■Dimensions: 300 × 300 × 450 (mm)
