瀝青混合料車轍試驗機是瀝青檢測儀器，適用于在試驗室用輪碾法制作瀝青混合料試件，該試件可供測定瀝青混合料的高溫抗車轍能力。
Asphalt mixture rutting tester is an asphalt testing instrument, which is suitable for making asphalt mixture test pieces by wheel milling method in the laboratory. The test pieces can be used to determine the high temperature rutting resistance of asphalt mixtures.
瀝青混合料車轍試驗機技術參數：
■試樣尺寸：300X300X50（100）mm
■試輪尺寸：￠200X50mm
■試論壓強：0.5±0.05Mpa-1.0±0.05Mpa可調
■輪碾壓速度：42±1次/分
■加熱功率：3KW
■溫度控制：60±0.5℃
■位移測量范圍：0-40mm±0.01mm
■外形尺寸:1800×800×1500mm
■環境溫度： ≤35℃
■相對濕度： ≤85%
■整機功耗：4KW
■儀器凈重： 300kg
■電源電壓：380v
Technical parameters of asphalt mixture rutting tester:
■ Sample size: 300X300X50 （100） mm
■ Test wheel size: ￠ 200X50mm
■ On the pressure: 0.5 ± 0.05Mpa-1.0 ± 0.05Mpa adjustable
■ Wheel rolling speed: 42 ± 1 times / minute
■ Heating power: 3KW
■ Temperature control: 60 ± 0.5 ℃
■ Displacement measurement range: 0-40mm ± 0.01mm
Dimensions: 1800 × 800 × 1500mm
■ Ambient temperature: ≤35 ℃
■ Relative humidity: ≤85%
■ Overall power consumption: 4KW
■ Net weight of the instrument: 300kg
■ Power supply voltage: 380v
瀝青混合料車轍試驗機特點：
■結構更加合理，客戶使用更加方便。
■在關鍵元器件的使用上，嚴格按照規范要求，同時高于規范要求，能夠真實反應測量結果。
■在溫度控制上，采用高精度的PID控制技術，使箱內溫度嚴格控制在60℃±0.5℃,滿足實驗要求。
■采用高精度位移傳感器，精度達到1‰，滿足試驗要求。
■試驗過程具有自動，手動控制功能，隨時間調整小車的位置。
■軟件功能強大，成熟，界面友好，可對位移核定值修改，確保數據準確。
■試驗機與恒溫箱一體化結構，恒溫箱體內膽均采用不銹鋼。
■可利用恒溫箱體進行試模養生。
■可隨時調整試驗輪壓強，A高可達1.0Mpa，滿足不同試驗要求
■雙操作模式，可以不用電腦而減小操作難度。
Features of Asphalt Mixture Rutting Tester:
■ The structure is more reasonable, and the customer is more convenient to use.
■ In the use of key components, it strictly complies with the requirements of the specification, and at the same time exceeds the requirements of the specification, it can truly reflect the measurement results.
■ In the temperature control, the high-precision PID control technology is adopted to make the temperature in the box strictly controlled at 60 ℃ ± 0.5 ℃, which fully meets the experimental requirements.
■ Using high-precision displacement sensor, the accuracy reaches 1 ‰, which fully meets the test requirements.
■ The test process has automatic and manual control functions to adjust the position of the cart over time.
■ The software is powerful, mature, and friendly. It can modify the displacement verification value to ensure the accuracy of the data.
■ The testing machine is integrated with the thermostat. The inner tank of the thermostat is made of stainless steel.
■ The thermostat box can be used for trial health.
■ Test wheel pressure can be adjusted at any time, A high can reach 1.0Mpa to meet different test requirements
■ Dual operation mode can reduce operation difficulty without computer.
