一、簡介：
表面硬度試驗儀適用于滲透型液體硬化劑的表面硬度測量。表面硬度原理是彈簧將規定的能量通過鋼球沖擊材料表面，通過測量試件表面的壓痕直徑來表征材料的表面硬度。
1. Introduction
The surface hardness tester is suitable for measuring the surface hardness of penetrating liquid hardeners. The principle of surface hardness is that the spring will impinge the specified energy on the surface of the material through a steel ball, and the surface hardness of the material is characterized by measuring the diameter of the indentation on the surface of the test piece.
二、組成：
壓痕硬度測試儀，由壓球、壓頭、沖擊桿、外殼、沖擊和彈簧組成。
2. Composition
The indentation hardness tester consists of a pressure ball, an indenter, an impact rod, a shell, an impact hammer and a spring.
三、技術參數：
1、沖擊錘能量：4.9J
2、壓球直徑：10mm
3、讀數放大鏡：0.1mm。
外形尺寸：55×370毫米
重量：約3.3千克
Three, technical parameters
1. Impact hammer energy: 4.9J
2. Pressure ball diameter: 10mm
3. Reading magnifying glass: 0.1mm.
Dimensions: 55×370 mm
Weight: about 3.3 kg
四、標準配備：
表面硬度試驗儀：1件
20倍讀數顯微鏡：1只
4. Standard equipment:
Surface hardness tester: 1 piece
20 times reading microscope: 1
