<tt id="i8i4i"><table id="i8i4i"></table></tt>
  • <li id="i8i4i"><table id="i8i4i"></table></li>
    <blockquote id="i8i4i"></blockquote>
    • <tt id="i8i4i"></tt>

    行業產品

    • 行業產品

    青島科迪博電子科技有限公司


    當前位置：青島科迪博電子科技有限公司>>妙測 M&C>>取樣探頭
    參  考  價面議
    具體成交價以合同協議為準

    產品型號

    品       牌

    廠商性質其他

    所  在  地青島市

    紡織服裝機械網采購部電話：0571-88918531QQ:2568841715

    聯系方式：查看聯系方式

    更新時間：2024-08-09 09:30:18瀏覽次數：74次

    聯系我時，請告知來自 紡織服裝機械網

    經營模式：其他

    商鋪產品：27條

    所在地區：

    產品簡介

    SP2000-H/DILBasedonprobeSP2000H/

    詳細介紹


    SP2000-H/DIL

    Based on probe SP2000H/....

    Electrically heated up to 180°C

    External critical orifice is heated

    Including a dilution gas pre-heater

    No dew point problems

    Dilution rates from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Easy operation and maintenance

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.


    SP2300-H/DIL

    Based on probe SP2300H/....

    Electrically heated up to 180°C

    External critical orifice is heated

    Including a dilution gas pre-heater

    No dew point problems

    Dilution rates from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Easy operation and maintenance

    Material: PTFE, FPM, ceramic

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2300H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.


    SP2000-H320/DIL

    Based on probe SP2000H/....

    Electrically heated up to 320°C

    External critical orifice is heated

    Including a dilution gas pre-heater

    No dew point problems

    Dilution rates from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Easy operation and maintenance

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.


    SP2000-H/DIL-VA

    Based on probe SP2000H/....

    Electrically heated up to 180°C

    External critical orifice is heated

    Including a dilution gas pre- heater

    No dew point problems

    Dilution rates from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Easy operation and maintenance

    With integrated ball valve at the probe inlet

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials. With the integrated ball valve it is possible to shut off the probe from the process for example to change the filter element in case of toxic sample gas.


    SP2000-H/DIL-B

    Based on probe SP2000H/....

    Electrically heated up to 180°C

    External critical orifice is heated

    Including a dilution gas pre- heater

    No dew point problems

    Dilution rates from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Easy operation and maintenance

    With bypass injector to minimize the response time

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.The additional bypass injector minimizes the response time.


    SP2000-H320/DIL-B

    Based on probe SP2000H/....

    Electrically heated up to 320°C

    External critical orifice is heated

    Including a dilution gas pre- heater

    No dew point problems

    Dilution rates from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Easy operation and maintenance

    With bypass injector to minimize the response time

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.The additional bypass injector minimizes the response time.


    SP2000-H/DIL-BR

    Based on probe SP2000H/....

    Electrically heated up to 180°C

    External critical orifice is heated

    Including a dilution gas pre- heater

    No dew point problems

    Dilution rates from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Easy operation and maintenance

    With bypass injector to minimize the response time and integrated gas recirculation

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.The additional bypass injector minimizes the response time and the integrated gas recirculation allows to remove the sample gas back into the process.

    SP2000-H320/DIL-BR

    Based on probe SP2000H/....

    Electrically heated up to 320°C

    External critical orifice is heated

    Including a dilution gas pre- heater

    No dew point problems

    Dilution rates from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Easy operation and maintenance

    With bypass injector to minimize the response time and integrated gas recirculation

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.The additional bypass injector minimizes the response time and the integrated gas recirculation allows to remove the sample gas back into the process.

    SP2000-H/DIL-VA-B

    Based on probe SP2000H/....

    Electrically heated up to 180°C

    External critical orifice is heated

    Including a dilution gas pre- heater

    No dew point problems

    Dilution rates from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Easy operation and maintenance

    With integrated ball valve at the probe inlet and bypass injector to minimize the response time

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials.With the integrated ball valve it is possible to shut off the probe from the process for example to change the filter element in case of toxic sample gas and the additional bypass injector minimizes the response time.


    SP2000-H/DIL-VA-BV

    Based on probe SP2000H/....

    Electrically heated up to 180°C

    External critical orifice is heated

    Including a dilution gas pre-heater

    No dew point problems

    Dilution rates from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Easy operation and maintenance

    With heated hand-operated ball valve at the sample inlet and bypass connection with needle valve in order to minimize the response time

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2000H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials. With the integrated ball valve it is possible to shut off the probe from the process for example to change the filter element in case of toxic sample gas and the additional bypass injector with needle valve minimizes the response time.


    SP2006-H/DIL-B/2x/F

    Based on probe SP2000-H/...

    Electrically heated up to 180 °C or 280 °C

    NEMA 4, FRP housing

    External heated critical orifice with additional safety filter

    Including a dilution gas pre-heater

    No dew point problems

    Dilution ratios from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Changing of dilution and bypass block without any tools within a few minutes

    No disconnection of any tubes or hoses for changing of dilution or bypass block

    Easy operation and maintenance

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2006H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials. The additional bypass injector minimizes the response time.


    SP2006-H/DIL-BR/2x/F

    Based on probe SP2000-H/...

    Electrically heated up to 180 °C or 280 °C

    NEMA 4, FRP housing

    External heated critical orifice with additional safety filter

    Including a dilution gas pre-heater

    No dew point problems

    Dilution ratios from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Changing of dilution and bypass block without any tools within a few minutes

    No disconnection of any tubes or hoses for changing of dilution or bypass block

    Easy operation and maintenance

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2006H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials. The additional bypass injector minimizes the response time.


    SP2006-H/DIL/2x/F

    Based on probe SP2000-H/...

    Electrically heated up to 180 °C or 280 °C

    NEMA 4, FRP housing

    External heated critical orifice with additional safety filter

    Including a dilution gas pre-heater

    No dew point problems

    Dilution ratios from 10:1 up to 500:1

    With check gas connection

    Independent of the process temperature

    Changing of dilution and bypass block without any tools within a few minutes

    No disconnection of any tubes or hoses for changing of dilution or bypass block

    Easy operation and maintenance

    Application:

    The electrically heated M&C dilution probe is applicable for such processes, where the measuring procedure or the handling of the process gas require the dilution of the sample respectively the component to be measured. Typical applications are the use with toxic gases, the moisture measurement and the emission measurement in flue gases. The M&C dilution probe SP2006H/DIL... is based on the well tested M&C gas sample probe SP2000H. This enables the user to adapt the probe to nearly every application, using for example special filter techniques or special materials. The additional bypass injector minimizes the response time.

    其他推薦產品更多>>

    您感興趣的產品PRODUCTS YOU ARE INTERESTED IN

    紡織服裝機械網 設計制作，未經允許翻錄必究 .? ? ? Copyright(C)?2021 http://www.lcservicesllc.com,All rights reserved.

    以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，紡織服裝機械網對此不承擔任何保證責任。 溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。

    會(huì )員登錄

    ×

    請輸入賬號

    請輸入密碼

    =

    請輸驗證碼

    收藏該商鋪

    請 登錄 后再收藏

    提示

    您的留言已提交成功！我們將在第一時間回復您~
    色欲综合久久躁天天躁_亚洲欧美另类激情综合区蜜芽_久久99国产综合精品女同_最近最好的2019中文日本字幕