882E 視頻HDMI 發(fā)生器和分析儀

• 3D Testing per HDMI with 3D Bitmap Conversion Tool 

• Image Control Tool to fine tune deep color images (882E only). 

• DTV ready–Pre-programmed standard DTV formats are ready for immediate use. Digital outputs support YCbCr color encoding. Analog outputs support tri-level composite sync and YPbPr. 

• Built-in formats–Over 350 popular video formats are built-in including VESA, ATSC, EIA-770.x, SMPTE 170, 240, 259, 267, 274, 292, 293, 295, 296, Australian, EIA/CEA-861D, NTSC and PAL. 

• Central administration–Update and configure all networked instruments from a single computer. 

• Network control–Fully control instrument from any network location with web browser or Telnet client. 

• Graphics SDK–Create complex patterns based on your specifications using C++ software development kit. 

• HDMI–Full single-link HDMI. DVI HDCP production keys for HDMI output. 

• Easy to use–Access powerful features easily using intuitive user interface. 

• Multiple configurations–Save and restore different instrument configurations for different applications. 

• Local pattern storage–Store multiple custom images (.bmp, .jpg, and .png) images in instrument. 

• Self-calibrating–Analog video outputs are automatically adjusted against an internal precision reference. This assures video levels that are precise and reliable. Signal levels are auto-adjusted individually. 

• Probe–Trigger a scope or inspection camera using the probe signal. Position a pulse anywhere in the frame. 

• PC Card–Clone one generator to another using a standard CompactFlash card. 

• Auxiliary Channel Analyzer (ACA)–The ACA enables you to monitor DDC, HDCP, CEC and EDID transactions for HDMI and HDCP, Link Layer and EDID transactions over the DisplayPort auxiliary channels.

• IEEE-488-GPIB (IEEE-488) interface. interface.

• RS-232-Industry standard serial interface. 

For the 882E one of the two following digital options must be selected:

• HDMI Transmitter:
  

• Advanced E-EDID parsing 

• 3D Pattern Testing for HDMI formats

• Deep Color at 24/30/36-bit/pixel 4:4:4 RGB / YCbCr

• 16/20/24-bit/pixel 4:2:2 YCbCr 

• High-level Active Format Description (AFD) controls

• AFD test suite 

• Pixel repetition test suite

• Automatic and manual InfoFrame setup 

• Compressed Dolby Digital formats (Plus & TrueHD) 

• Internal sine wave generator (LPCM), and external SPDIF audio input 

• 32, 44.1, 48, 88.2, 176.4 and 192kHz audio sampling rates 

• Generates all EIA/CEA-861D formats below 165 MHz, with all possible variations 

• Complete letterbox and scope coverage 

• 4:2:2 color sub-sampling at 8, 10, and 12-bits per component 

• Hot-plug format list 

• Includes DVI-D (M) to HDMI (M) cable and HDMI-HDMI cable. 

• DisplayPort Transmitter:
  

• Link layer testing (compliance and monitoring) 

• HDCP compliance testing of sink devices 

• Pixel rates up to 268MHz 

• 1, 2 & 4 lanes user selectable 

• 1.62GB/s and 2.7Gb/s per lane rate user selectable 

• 4:4:4 color sub-sampling 

• 6, 8, and 10-bits per component 

• RGB and YCbCr colorimetry 

• Hot-plug format list 

• Includes DisplayPort cable. 

• Analog Video component and composite (882E HDMI only)

• Component analog up to 250MHz 

• Component analog VGA Connector 

• Composite analog on S-video and BNC Connectors 

For the 882E one of the two following analyzer options can be selected:

• HDMI Analyzer available with HDMI Tx on 882E only 
  

• Dual HDMI Tx and dual HDMI Rx ports

• Supports full single-link HDMI (with deep color) and DVI analyzer up to (150MHz) in same instrument. 

• Measure source timing and source pixel errors. Also useful for testing cables. Test results can be issued as formatted reports. 

• Emulate EDIDs.

• DisplayPort Analyzer available with DisplayPort Tx on 882E only 
  

• Provides monitoring of auxiliary channel such as EDID, HDCP and link layer transactions through internal connector. 

• Supports link layer compliance testing for DisplayPort source devices in addition to DisplayPort sink devices. 

• Emulate VESA EDIDs.

• Single DisplayPort Tx and Single DisplayPort Rx ports

For the 882E HDMI, the following options are available:

• Options with the 882E HDMI 
  

• CEC Integrated Troubleshooting Environment (ITE)

• Options with the 882E HDMI Analyzer 
  

• CEC Integrated Troubleshooting Environment (ITE) - Debug environment

• CEC Test Management Environment (TME) - HDMI CEC compliance (approved by HDMI)

• HDCP compliance test - HDMI HDCP CTS 1.2

For the 882E DisplayPort, the following options are available:

• Options with the 882E DisplayPort 
  

• VESA EDID 1.4 Verification Test

• Options with the 882E DisplayPort Analyzer 
  

• HDCP compliance test for DisplayPort sink devices

• Link Layer compliance test for DisplayPort sink devices (VESA approved)

• Link Layer compliance test for DisplayPort sink & source devices (VESA approved)

• Auxiliary Channel Analzyer (ACA)

• VESA EDID 1.4 Verification Test

• Null Modem (p/n 30-00124)–The null modem cable is provide with all 880 series generators. It is used for connecting a PC to the generator to control the generator through the commａnd line interface.

• Ethernet cross over cable (p/n 30-00151)–The Ethernet cross over cable is provide with all 880 series generators. It is used for connecting a PC to the generator for web browser access.

• Line Cord (p/n 30A00400A03)–The 6 foot line cord is provided with all 880 series generators. It is a detachable power cord used to provide power to the generator.

• BNC to RCA adaptor (p/n 30-00123)–The BNC to RCA adaptor is provided with 880 series generators. It is used on the TV to allow a coaxial cable connection from the TV to the generator's BNC TV output.

• DVI to HDMI adaptor (p/n 30-00145)–The 6 foot DVI to HDMI cable is provided with 880 series generators. It is used to connect the generator to a DVI monitor from the generator's HDMI output connector.

• HDMI to HDMI cable (p/n 30-00146)–The 6 foot HDMI to HDMI cable is provided with 880 series generators. It is used to connect the generator to an HDMI monitor from the generator's HDMI output connector.

• DisplayPort to DisplayPort cable (p/n 30-00162)–The 6 foot DisplayPort to DisplayPort cable is provided with 880 series generators. It is used to connect the generator to a DisplayPort monitor or transmitter from one of the 882E DisplayPort connectors.

• ESD-1 (00-00167). Provides external ESD protection for DVI connectors.

• 128MB Compact flash memory card (82-00133 and 82-00134)

• Remote keypad (00-00123) Allow entry of numeric commａnd to load images and formats from up to 43" (1.1 m) from the generator.

•