六速旋轉粘度計可進行各流變參數的測量，根據多點測量數值繪制流變曲線，確定液體在流動過程中的流型。六速旋轉粘度計選用合適的計算公式，對非牛頓流體進行較**的測量。用于現場鉆井液流變參數的研究分析。
The six-speed rotary viscometer can measure various rheological parameters, draw rheological curves based on multi-point measurement values, and determine the flow pattern of the liquid in the flow process. The six-speed rotational viscometer uses appropriate calculation formulas to make the most non-Newtonian fluid measurements. Used for research and analysis of rheological parameters of on-site drilling fluid.
六速旋轉粘度計技術參數：
■電源：220V±5%
■電機功率：7.5W/15W
■電機轉速：750/1500 r/min
■變速范圍：3、6、100、200、300、600 r/min
■速梯：5、10、170、340、511、1022S-1
■測量精度1~25 mPa.s （牛頓流體）
25 mPa·s以上 ±4%（牛頓流體）
■粘度測量范圍：牛頓流體：0～300mPa·s （F1測量組件）
0～60mPa·s （F0.2測量組件）
非牛頓流體：0～30mPa·s （F1測量組件）
剪切應力： 0～153.3Pa （F1測量組件）
0～30.7Pa（F02測量組件）
Technical parameters of six-speed rotary viscometer:
■ Power supply: 220V ± 5%
■ Motor power: 7.5W / 15W
■ Motor speed: 750/1500 r / min
■ Speed range: 3, 6, 100, 200, 300, 600 r / min
■ Speed Ladder: 5, 10, 170, 340, 511, 1022S-1
■ Measurement accuracy 1 ~ 25 mPa.s (Newtonian fluid)
25 mPa · s or more ± 4% (Newtonian fluid)
■ Viscosity measurement range: Newtonian fluid: 0 ～ 300mPa · s (F1 measurement component)
0 ～ 60mPa · s (F0.2 measuring module)
Non-Newtonian fluid: 0 ～ 30mPa · s (F1 measurement unit)
Shear stress: 0 ～ 153.3Pa (F1 measurement module)
0 ～ 30.7Pa (F02 measuring component)
六速旋轉粘度計作為一種好的現場和實驗室儀器，使用者只需通過簡單操作**可作為鉆井液的流變性測定完成標準的API實驗。標準的轉速（如3、6、100、200、300、600r/min）通過轉換開關及變速拉桿進行變換，鉆井液的各種流變參數可通過儀器頂部的刻度盤視窗直接讀出。
As a good field and laboratory instrument, the six-speed rotary viscometer can be used to perform standard API experiments as a rheological measurement of drilling fluid by simple operation **. The standard speed (such as 3, 6, 100, 200, 300, 600r / min) is changed by a changeover switch and a variable speed rod. Various rheological parameters of drilling fluid can be read directly through the dial window on the top of the instrument.
六速旋轉粘度計共有兩種測量組建可選，分別為F0.2測量組建和F1.0測量組建，適用于；
牛頓流體 0~300mPa.s(F1測量組件)
0~60 mPa.s(F0.2測量組件)
非牛頓流體 0~150mPa.s(F1測量組件)
0~30 mPa.s(F0.2測量組件)
剪切應力 0~153 Pa(F1測量組件)
0~30.7 Pa(F0.2測量組件)
The six-speed rotary viscometer has two types of measurement components, which are F0.2 measurement component and F1.0 measurement component.
Newtonian fluid 0 ~ 300mPa.s (F1 measurement unit)
0 ~ 60 mPa.s (F0.2 measuring component)
Non-Newtonian fluid 0 ~ 150mPa.s (F1 measurement component)
0 ~ 30 mPa.s (F0.2 measuring component)
Shear stress 0 ~ 153 Pa (F1 measurement unit)
0 ~ 30.7 Pa (F0.2 measuring component)
